| Raw Water Hose Reel System
 |
|
HR8 Raw Water Hose Reel System is a replacement for raw water towers on offshore rigs.
Purpose: Developed to offer drilling contractors a lower cost, lighter weight means of replacing raw water towers and electrical submersible pumps while providing for enhanced safety, faster deployment times, easier maintenance, more flexibility, less down time and buil in redundancy when installed in pairs.
Features and Benefits:
Light weight -15,000 lbs system replaces structures of 120,000 lbs or more
-increases rig load capacity without modifications
Fast Deployment -raw water pumps operational in 15 minutes instead of 2 hours
Small and Portable -readily moved to rig to add pump capacity and reduce preload time
Self contained: -skid mounted reels, explosion proof electrically driven hydraulic power unit and control console
Safer Operation: -reels operate automatically in adjustable constant tension mode
-manual independent reel operation
-automatic fail safe brake with manual release for emergency deployment
|
|
|
|
|
Hose reel capacity: |
150 ft of 6" ID water hose with 6500 lbs bare drum line pull* |
|
Electrical reel: |
150 ft of 1" OD 3 phase cable with 300 lbs bare drum line pull* |
|
Cable reel: |
150 ft of ½" OD cable with 300 lbs bare drum line pull* |
|
Overall skid length: |
96" / 244 cm |
|
Overall skid width: |
110" / 279 cm |
|
Overall height: |
144" / 365 cm |
|
Approximate weight: |
10,000 lbs / 4,535 kg (without hose and cables) |
|
Approximate weight: |
15,000 lbs / 6,800 kg (with filled hose and cables, excluding ESP) |
|
Power requirements: |
230/460 VAC, 50/60 Hz, 36.4/18.2 amps 3 phase |
|
Hydraulic output: |
2,500 psi / 172 bar, 9 GPM / 34 lpm |
|
Hose Reel speed: |
½ RPM or 9 feet per minute / 2.9 meters per minute on bare drum |
|
*ESP, hose and cables must be ordered separately or supplied by others |
