| CLEBU11750 Bucking Unit - Type II
|
APPLICATION: The CLINCHER Bucking Unit is the premiere bucking unit specifically designed to make and break premium thread connections on all oil country tubular goods. The unit minimizes the radial load on the tube to prevent deformation while allowing maximum torque for the connection requirements. The CLINCHER Type II Bucking Unit is a chain driven unit which features a hydraulically driven closed style tong module with open style Lockjaw backup module. Backup is mounted on 6 ft. bed and can be moved + or - 3 ft. to accommodate downhole assemblies. (Alternate bed lengths available on request.)
|
Above Type II bucking unit shown with optional second bed unit.
|
Maximum Torque Higher Ratings on Request |
30,000 ft. lbs. / 40,675 Nm |
|
Maximum Operating Pressure |
3,000 P.S.I. / 20.7 Bar |
|
RPM @ 47 GPM / 178 LPM |
w/ 2 Speed Motor |
|
Low Pressure/High Volumn / High/Low / Low/High |
1,000 P.S.I. / 28 GPM / 7 RPM/ 3.5 RPM |
|
High Pressure / Low Volumn / High/ Low / Low/ High |
2,500 P.S.I. / 12 GPM / 3 RPM / 1.5 RPM |
|
Handle Length |
24" / 61.0 cm |
|
Length |
6' Standard (Additional lengths built to order) |
|
Width w/o Console |
58" / 147.3 cm |
|
1 Jaw Size |
Dies Available 1.660" thru 11 3/4" |
|
**Note: Optional air operated clamping pressure intensifiers for high torque applications using power units which cannot deliver 3,000 psi are available.
You will need a PDF reader program to view this product manual. Click here to get your free Adobe Acrobat Reader. |
